design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc C eee-63 C 0 10 0 d0.05 sleeve 14 min. 3 min. l = ( = 0 8 l 15, 0 16 l 15, 0 18 l 15 : l1.5) pressure relief 0 6.3 but exclude 7 mm height = l 16 : l1.0 l 20 : l2.0 + C 0 4 to 0 8 0 d0.5 f0.5 0 d0.5 features endurance : 105 c 1000 h to 5000 h low impedance rohs directive compliant radial lead type series: fc type: a specifi cations category temp. range C55 c to +105 c rated w.v. range 6.3 v.dc to 10 0 v.dc nominal cap. range 2.2 f to 15000 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv or 3 (a) after 2 minutes (whichever is greater) tan d w.v. (v) 6.3 10 16 25 35 50 63 100 (120 hz/+20 c) tan d 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 for capacitance value > 1000 f, add 0.02 per every 1000 f. endurance after following life test with dc voltage and +105 c2 c ripple current value applied (the sum of dc and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 c, the capacitors shall meet the limits speci? ed bellow. duration : 0 4 to 0 6.3: 1000 hours, 0 8: 2000 hours , 0 10: 3000 hours , 0 12.5 to 0 18: 5000 hours capacitance change 20 % of initial measured value tan d < 200 % of initial speci? ed value dc leakage current < initial speci? ed value shelf life after storage for 1000 hours at +105 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance. (with voltage treatment) w.v.(v.dc) cap (f) frequency (hz) 60 120 1 k 10 k 100 k 6.3 to 100 2.2 to 330 0.55 0.65 0.85 0.90 1.00 390 to 1000 0.70 0.75 0.90 0.95 1.00 1200 to 2200 0.75 0.80 0.90 0.95 1.00 2700 to 15000 0.80 0.85 0.95 1.00 1.00 frequency correction factor for ripple current l > 11 l=7 body dia. 0 d 4 5 6.3 8 10 12.5 16 18 4 5 6.3 body length l 15 to 25 30 to 40 lead dia. 0 d 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.45 0.45 0.45 lead space f 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 1.5 2.0 2.5 di men sions in mm (not to scale) (unit : mm) 02 dec. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc C eee-64 C case size/ impedance/ ripple current w.v(v.dc) 6.3 v to 35 v 50 v 63 v 100 v case size ( 0 d l) imped ance ( )/(100 khz) ripple current (ma r.m.s) /(100 khz) imped ance ( )/(100 khz) ripple current (ma r.m.s) /(100 khz) imped ance ( )/(100 khz) ripple current (ma r.m.s) /(100 khz) imped ance ( )/(100 khz) ripple current (ma r.m.s) /(100 khz) 20 c C10 c 20 c C10 c 20 c C10 c 20 c C10 c 4 7 2.00 5.00 65 5 70.9502.40 120 6.3 70.4501.20 200 4 11 1.302.60 1202.505.00 903.507.00 80 5 11 0.8 0 0 1.6 0 175 ?? ? 2.00 4.00 145 4.10 8.20 80 5 15 0.500 1.00 235 0.900 1.80 215 1.30 2.60 200 2.80 5.60 90 6.3 11.2 0.350 0.700 290 0.600 1.20 260 1.00 2.00 240 1.80 3.60 114 6.3 15 0.250 0.500 400 0.400 0.800 360 0.700 1.40 330 1.10 2.20 155 8 11.5 0.117 0.234 555 0.234 0.468 485 0.342 0.684 405 0.680 1.36 260 8 15 0.085 0.170 730 0.155 0.310 635 0.230 0.460 535 0.450 0.900 340 8 20 0.065 0.130 995 0.120 0.240 860 0.178 0.356 690 0.330 0.660 455 10 12.5 0.090 0.180 755 0.162 0.324 615 0.256 0.512 535 0.530 1.06 306 10 16 0.068 0.136 1050 0.119 0.238 850 0.194 0.388 600 0.360 0.720 400 10 20 0.052 0.104 1220 0.090 0.180 1030 0.147 0.294 885 0.240 0.480 463 10 25 0.045 0.090 1440 0.082 0.164 1200 0.130 0.260 1050 0.210 0.420 599 10 30 0.035 0.070 1815 0.060 0.120 1610 0.090 0.180 1300 0.150 0.300 698 12.5 15 0.065 0.130 1205 0.110 0.220 1150 0.150 0.300 1020 0.230 0.460 511 12.5 20 0.038 0.076 1655 0.063 0.126 1480 0.085 0.170 1285 0.180 0.360 671 12.5 25 0.030 0.060 1945 0.050 0.100 1832 0.070 0.140 1720 0.110 0.220 807 12.5 30 0.025 0.050 2310 0.040 0.080 2215 0.055 0.110 2090 0.098 0.196 937 12.5 35 0.022 0.044 2510 0.034 0.068 2285 0.047 0.094 2265 0.087 0.174 1040 12.5 40 0.018 0.036 2655 0.030 0.060 2590 0.042 0.084 2560 0.072 0.144 1130 16 15 0.043 0.086 1690 0.080 0.160 1610 0.090 0.180 1410 0.140 0.280 793 16 20 0.029 0.058 2205 0.048 0.096 1835 0.059 0.118 1765 0.110 0.220 995 16 25 0.022 0.044 2555 0.034 0.068 2235 0.050 0.100 2160 0.089 0.178 1170 16 31.5 0.018 0.036 3010 0.028 0.056 2700 0.043 0.086 2670 0.062 0.124 1520 16 35.5 0.016 0.032 3150 0.025 0.050 2790 0.036 0.072 2770 0.053 0.106 1730 16 40 0.015 0.030 3360 0.023 0.046 2845 0.030 0.060 2825 0.047 0.094 1920 18 15 0.038 0.076 2000 0.068 0.136 1900 0.086 0.172 1690 0.120 0.240 917 18 20 0.028 0.056 2490 0.042 0.084 2420 0.055 0.110 2290 0.080 0.160 1230 18 25 0.020 0.040 2740 0.029 0.058 2610 0.043 0.086 2585 0.070 0.140 1420 18 31.5 0.016 0.032 3635 0.025 0.050 3000 0.032 0.064 2950 0.062 0.124 1600 18 35.5 0.015 0.030 3680 0.023 0.046 3100 0.030 0.060 3095 0.041 0.082 1770 18 40 0.014 0.028 3735 C C C 0.025 0.050 3205 0.036 0.072 2300 ? case size ( 0 d l) capacitance (f) imped ance ( )/(100 khz) ripple current (ma r.m.s)(100 khz) 20 c C10 c 5 11 1.0 2.40 4.80 20 2.2 1.80 3.60 45 3.3 1.30 2.60 65 4.7 1.30 2.60 95 10 1.30 2.60 125 12 1.30 2.60 135 15 1.30 2.60 145 18 1.30 2.60 155 22 1.30 2.60 155 01 oct. 2013
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc ? eee-65 ? standard prod ucts w.v. cap. ( 20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (100 khz) (+105 c) imped- ance (100 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (?) ( mm) (mm) (ma r. m.s.) ( )(hours)(mm) (mm) (mm) (mm) (pcs) (pcs) 6.3 27 4 7 65 2. 000 1000 0.45 1.5 5.0 2.5 eeafc0j270( ) 200 2 000 56 5 7 120 0.950 1 000 0.45 2. 05.02.5 eeafc0j5 60( ) 200 2 000 68 4 11 120 1.300 1 000 0.45 1. 55.02.5 eeufc0j 680( ) 200 2 000 100 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc0j101( ) 200 2 000 120 6.3 7 200 0.450 1 000 0.45 2. 55.02.5 eeafc0j1 21( ) 200 2 000 150 5 15 235 0.500 1 000 0.50 2. 05.02.5 eeufc0j1 51( ) 200 2 000 220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 eeufc0j221( ) 200 2 000 270 6.3 11.2 290 0.350 1 000 0.50 2. 55.02.5 eeufc0j2 71( ) 200 2 000 330 6.3 11.2 290 0.350 1 000 0.50 2. 55.02.5 eeufc0j331s( ) 200 2 000 6.3 15 400 0.250 1 000 0.50 2. 55.02.5 eeufc0j331( ) 200 2 000 390 8 11.5 555 0.11 72 000 0.60 3.5 5.0 eeufc0j3 91( ) 200 1 000 470 8 11.5 555 0.117 2000 0.60 3.5 5.0 eeufc0j4 71( ) 200 1 000 560 8 11.5 555 0.117 2000 0.60 3.5 5.0 eeufc0j5 61( ) 200 1 000 820 8 15 730 0.085 2000 0.60 3.5 5.0 eeufc0j821l( ) 200 1 000 10 12.5 75 5 0.090 3000 0.60 5.0 5.0 eeufc0j821( ) 200 500 1 000 10 12.5 755 0.0 90 3000 0. 60 5.0 5.0 eeufc0j1 02( ) 200 500 1200 8 20 995 0.065 2000 0.60 3.5 5.0 eeufc0j122l( ) 200 1 000 10 16 1050 0.068 3 000 0.60 5.0 5.0 eeufc0j1 22( ) 200 500 1500 10 20 1220 0.052 3000 0.60 5.0 5.0 eeufc0j1 52( ) 200 500 12.5 15 1205 0.065 5 000 0.60 5.0 5.0 eeufc0j152s( ) 200 500 1800 10 25 1440 0.045 3000 0.60 5.0 5.0 eeufc0j182( ) 200 500 2200 10 25 1440 0.045 3000 0.60 5.0 5.0 eeufc0j 222( ) 200 500 16 15 1690 0.043 5 000 0.80 7.5 7.5 eeufc0j 222s( ) 100 250 2700 10 30 1815 0.035 3000 0.60 5.0 eeufc0j272l 100 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc0j2 72( ) 200 500 16 15 1690 0.043 5 000 0.80 7.5 7.5 eeufc0j272s( ) 100 250 3300 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc0j332( ) 200 500 18 15 2 000 0.038 5000 0.80 7.5 7.5 eeufc0j332s( ) 100 250 3900 12.5 25 1945 0.030 5000 0.60 5.0 5.0 eeufc0j3 92( ) 200 500 4700 12.5 30 23 10 0.025 5000 0.80 5.0 eeufc0j472 100 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc0j472s( ) 100 250 5600 12.5 35 25 10 0.022 5000 0.80 5.0 eeufc0j562l 100 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc0j5 62( ) 100 250 6800 12.5 40 26 55 0.018 5000 0.80 5.0 eeufc0j682l 100 16 25 2 555 0.022 5000 0.80 7.5 7.5 eeufc0j682( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 eeufc0j682s( ) 100 250 8200 16 31.5 3010 0.018 5000 0.80 7.5 eeufc0j822 100 1 0000 16 35.5 31 50 0.016 5000 0.80 7.5 eeufc0j103 100 18 25 2740 0.020 5000 0.80 7.5 7.5 eeufc0j103s( ) 100 250 12 000 16 40 3360 0.015 5000 0.80 7.5 eeufc0j123l 100 18 31.5 36 35 0.016 5000 0.80 7.5 eeufc0j123 50 15 000 18 35.5 3680 0.015 5000 0.80 7.5 eeufc0j153 50 ?when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch b=5 mm, 7.5 mm, h=2.5 mm. ?please refer to the page of ?aping dimensions? endurance : 105 ? 4 to 6.3=1000 h, 8=2000 h, 10=3000 h, 12.5 to 18=5000 h 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc ? eee-66 ? standard prod ucts w.v. cap. ( 20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (100 khz) (+105 c) imped- ance (100 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (?) ( mm) (mm) (ma r. m.s.) ( )(hours)(mm) (mm) (mm) (mm) (pcs) (pcs) 10 22 4 7652. 000 1000 0.45 1.5 5.0 2.5 eeafc1a2 20( ) 200 2 000 39 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 eeafc1a3 90( ) 200 2 000 47 4 11 120 1.300 1 000 0.45 1. 55.02.5 eeufc1a470( ) 200 2 000 82 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1a8 20( ) 200 2 000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 eeafc1a8 20( ) 200 2 000 100 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1a101s( ) 200 2 000 5 15 235 0.500 1 000 0.50 2. 05.02.5 eeufc1a1 01( ) 200 2 000 150 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1a151( ) 200 2 000 180 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1a1 81( ) 200 2 000 220 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1a221s( ) 200 2 000 6.3 15 400 0.250 1 000 0.50 2. 55.02.5 eeufc1a221( ) 200 2 000 330 8 11.5 555 0. 117 2 000 0.60 3.5 5.0 eeufc1a3 31( ) 200 1 000 390 8 11.5 555 0. 117 2 000 0.60 3.5 5.0 eeufc1a3 91( ) 200 1 000 470 8 11 .5 555 0.117 2000 0.60 3.5 5.0 eeufc1a471( ) 200 1 000 560 10 12.5 755 0.090 3000 0.60 5.0 5.0 eeufc1a561( ) 200 500 680 8 15 730 0.085 2000 0.60 3.5 5.0 eeufc1a681l( ) 200 1 000 10 12.5 75 5 0.090 3000 0.60 5.0 5.0 eeufc1a681( ) 200 500 820 10 16 1050 0.068 3000 0.60 5.0 5.0 eeufc1a821( ) 200 500 1 000 8 20 995 0.065 2000 0.60 3.5 5.0 eeufc1a102l( ) 200 1 000 10 16 1050 0.068 3 000 0.60 5.0 5.0 eeufc1a1 02( ) 200 500 1200 10 20 12 20 0.052 3000 0.60 5.0 5.0 eeufc1a1 22( ) 200 500 12.5 15 1205 0.065 5 000 0.60 5.0 5.0 eeufc1a122s( ) 200 500 1500 10 25 1440 0.045 3000 0.60 5.0 5.0 eeufc1a152( ) 200 500 1800 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc1a182( ) 200 500 16 15 1690 0.043 5 000 0.80 7.5 7.5 eeufc1a182s( ) 100 250 2200 10 30 1815 0.035 3000 0.60 5.0 eeufc1 a 222l 100 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc1a 222( ) 200 500 2700 12.5 25 1945 0.030 5000 0.60 5.0 5.0 eeufc1a 272( ) 200 500 18 15 2 000 0.038 5000 0.80 7.5 7.5 eeufc1a 272s( ) 100 250 3300 12.5 30 23 10 0.025 5000 0.80 5.0 eeufc1a332 100 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1a332s( ) 100 250 3900 12.5 35 25 10 0.022 5000 0.80 5.0 eeufc1a392l 100 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1a3 92( ) 100 250 4700 12.5 40 26 55 0.018 5000 0.80 5.0 eeufc1a472l 100 16 25 2 555 0.022 5000 0.80 7.5 7.5 eeufc1a472( ) 100 250 5600 16 25 2 555 0.022 5000 0.80 7.5 7.5 eeufc1a562( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 eeufc1a562s( ) 100 250 6800 16 31.5 30 10 0.018 5000 0.80 7.5 eeufc1a682 100 18 25 2740 0.020 5000 0.80 7.5 7.5 eeufc1a682s( ) 100 250 8200 16 35.5 31 50 0.016 5000 0.80 7.5 eeufc1a822l 100 18 31.5 36 35 0.016 5000 0.80 7.5 eeufc1a822 50 1 0000 18 35.5 3680 0.015 5000 0.80 7.5 eeufc1a103 50 12 000 18 40 3735 0.014 5000 0.80 7.5 eeufc1a123 50 ?when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch b=5 mm, 7.5 mm, h=2.5 mm. ?please refer to the page of ?aping dimensions? endurance : 105 ? 4 to 6.3=1000 h, 8=2000 h, 10=3000 h, 12.5 to 18=5000 h 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc ? eee-67 ? standard prod ucts w.v. cap. ( 20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (100 khz) (+105 c) imped- ance (100 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (?) ( mm) (mm) (ma r. m.s.) ( )(hours)(mm) (mm) (mm) (mm) (pcs) (pcs) 16 15 4 7652. 000 1000 0.45 1.5 5.0 2.5 eeafc1 c150 ( ) 200 2 000 27 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 eeafc1c270( ) 200 2 000 39 4 11 120 1.3 01 000 0.45 1. 55.02.5 eeufc1c3 90( ) 200 2 000 47 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1c470( ) 200 2 000 56 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1c5 60( ) 200 2 000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 eeafc1c5 60( ) 200 2 000 68 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1c 680( ) 200 2 000 82 5 15 235 0.500 1 000 0.50 2. 05.02.5 eeufc1c8 20( ) 200 2 000 100 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1 c101( ) 200 2 000 120 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1 c121 ( ) 200 2 000 180 6.3 15 400 0.2 50 1000 0.50 2.5 5.0 2.5 eeufc1 c181( ) 200 2 000 220 8 11.5 555 0. 117 2 000 0.60 3.5 5.0 eeufc1c221( ) 200 1 000 270 8 11.5 555 0.117 2000 0.60 3.5 5.0 eeufc1c271( ) 200 1 000 330 8 11.5 555 0. 117 2 000 0.60 3.5 5.0 eeufc1c331( ) 200 1 000 390 10 12.5 755 0.090 3000 0.60 5.0 5.0 eeufc1c3 91( ) 200 500 470 8 15 730 0.085 2000 0.60 3.5 5.0 eeufc1c471l( ) 200 1 000 10 12.5 75 5 0.090 3000 0.60 5.0 5.0 eeufc1c471( ) 200 500 560 10 16 1050 0.068 3000 0.60 5.0 5.0 eeufc1c561( ) 200 500 680 8 20 995 0.065 2000 0.60 3.5 5.0 eeufc1c681l( ) 200 1 000 10 16 1050 0.068 3 000 0.60 5.0 5.0 eeufc1c681( ) 200 500 820 10 20 1220 0.052 3000 0.60 5.0 5.0 eeufc1c821( ) 200 500 12.5 15 1205 0.065 5 000 0.60 5.0 5.0 eeufc1c821s( ) 200 500 1 000 10 20 1220 0.052 3000 0.60 5.0 5.0 eeufc1 c102s( ) 200 500 10 25 1440 0.045 3000 0.60 5.0 5.0 eeufc1 c102 ( ) 200 500 1200 10 25 1440 0.045 3000 0.60 5.0 5.0 eeufc1 c122 ( ) 200 500 16 15 1690 0.043 5 000 0.80 7.5 7.5 eeufc1 c122s( ) 100 250 1500 10 30 1815 0.035 3000 0.60 5.0 eeufc1 c152l 100 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc1 c152 ( ) 200 500 16 15 1690 0.043 5 000 0.80 7.5 7.5 eeufc1 c152s( ) 100 250 1800 12.5 25 19 45 0.030 5000 0.60 5.0 5.0 eeufc1 c182( ) 200 500 18 15 2 000 0.038 5000 0.80 7.5 7.5 eeufc1 c182s( ) 100 250 2200 12.5 25 19 45 0.030 5000 0.60 5.0 5.0 eeufc1c 222( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1c 222s( ) 100 250 2700 12.5 30 23 10 0.025 5000 0.80 5.0 eeufc1 c 272l 100 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1c 272( ) 100 250 3300 12.5 35 25 10 0.022 5000 0.80 5.0 eeufc1c332 100 18 20 2490 0.028 5000 0.80 7.5 7.5 eeufc1c332s( ) 100 250 3900 16 25 2 555 0.022 5000 0.80 7.5 7.5 eeufc1c3 92( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 eeufc1c392s( ) 100 250 4700 16 31.5 30 10 0.018 5000 0.80 7.5 eeufc1c472 100 18 25 2740 0.020 5000 0.80 7.5 7.5 eeufc1c472s( ) 100 250 5600 16 35.5 31 50 0.016 5000 0.80 7.5 eeufc1c562l 100 18 31.5 36 35 0.016 5000 0.80 7.5 eeufc1c562 50 6800 16 40 3360 0.015 5000 0.80 7.5 eeufc1c682 100 8200 18 35.5 3680 0.015 5000 0.80 7.5 eeufc1c822 50 ?when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch b=5 mm, 7.5 mm, h=2.5 mm. ?please refer to the page of ?aping dimensions? endurance : 105 ? 4 to 6.3=1000 h, 8=2000 h, 10=3000 h, 12.5 to 18=5000 h 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc ? eee-68 ? standard prod ucts w.v. cap. ( 20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (100 khz) (+105 c) imped- ance (100 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (?) ( mm) (mm) (ma r. m.s.) ( )(hours)(mm) (mm) (mm) (mm) (pcs) (pcs) 25 10 4 7652. 000 1000 0.45 1.5 5.0 2.5 eeafc1e1 00( ) 200 2 000 22 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 eeafc1e2 20( ) 200 2 000 27 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 eeufc1e270( ) 200 2 000 39 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1e390( ) 200 2 000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 eeafc1e390( ) 200 2 000 47 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1e470( ) 200 2 000 56 5 15 235 0.500 1 000 0.50 2. 05.02.5 eeufc1e5 60( ) 200 2 000 82 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1e8 20( ) 200 2 000 100 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1e101s( ) 200 2 000 120 6.3 15 400 0.2 50 1000 0.50 2.5 5.0 2.5 eeufc1e1 21( ) 200 2 000 180 8 11 .5 555 0.117 2000 0.60 3.5 5.0 eeufc1e181( ) 200 1 000 220 8 11.5 555 0. 117 2 000 0.60 3.5 5.0 eeufc1e2 21( ) 200 1 000 270 10 12.5 755 0.090 3000 0.60 5.0 5.0 eeufc1e271( ) 200 500 330 8 15 730 0.085 2000 0.60 3.5 5.0 eeufc1e331l( ) 200 1 000 10 12.5 75 5 0.090 3000 0.60 5.0 5.0 eeufc1e3 31( ) 200 500 390 10 16 1050 0.068 3000 0.60 5.0 5.0 eeufc1e391( ) 200 500 470 8 20 995 0.065 2000 0.60 3.5 5.0 eeufc1e471l( ) 200 1 000 10 16 1050 0.068 3 000 0.60 5.0 5.0 eeufc1e471( ) 200 500 560 10 20 12 20 0.052 3000 0.60 5.0 5.0 eeufc1e5 61( ) 200 500 12.5 15 1205 0.065 5 000 0.60 5.0 5.0 eeufc1e561s( ) 200 500 680 10 20 1220 0.0 52 3000 0.60 5.0 5.0 eeufc1e681( ) 200 500 820 10 25 1440 0.045 3000 0.60 5.0 5.0 eeufc1e821( ) 200 500 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc1e821s( ) 200 500 1 000 10 30 1815 0.035 3000 0.60 5.0 eeufc1e102l 100 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc1e1 02( ) 200 500 16 15 1690 0.043 5 000 0.80 7.5 7.5 eeufc1e102s( ) 100 250 1200 12.5 25 19 45 0.030 5000 0.60 5.0 5.0 eeufc1e1 22( ) 200 500 18 15 2 000 0.038 5000 0.80 7.5 7.5 eeufc1e122s( ) 100 250 1500 12.5 25 19 45 0.030 5000 0.60 5.0 5.0 eeufc1e1 52( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1e152s( ) 100 250 1800 12.5 30 23 10 0.025 5000 0.80 5.0 eeufc1e182l 100 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1e182( ) 100 250 2200 12.5 35 25 10 0.022 5000 0.80 5.0 eeufc1e222 100 18 20 2490 0.028 5000 0.80 7.5 7.5 eeufc1e222s( ) 100 250 2700 16 25 2 555 0.022 5000 0.80 7.5 7.5 eeufc1e2 72( ) 100 250 3300 16 31.5 30 10 0.018 5000 0.80 7.5 eeufc1e332 100 18 25 2740 0.020 5000 0.80 7.5 7.5 eeufc1e332s( ) 100 250 3900 16 35.5 31 50 0.016 5000 0.80 7.5 eeufc1e392l 100 18 31.5 36 35 0.016 5000 0.80 7.5 eeufc1e392 50 4700 18 35.5 3680 0.015 5000 0.80 7.5 eeufc1e472 50 5600 18 40 3735 0.014 5000 0.80 7.5 eeufc1e562 50 ?when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch b=5 mm, 7.5 mm, h=2.5 mm. ?please refer to the page of ?aping dimensions? endurance : 105 ? 4 to 6.3=1000 h, 8=2000 h, 10=3000 h, 12.5 to 18=5000 h 00 nov. 2012
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc ? eee-69 ? standard prod ucts w.v. cap. ( 20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (100 khz) (+105 c) imped- ance (100 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (?) ( mm) (mm) (ma r. m.s.) ( )(hours)(mm) (mm) (mm) (mm) (pcs) (pcs) 35 6.8 4 7 65 2. 000 1000 0.45 1.5 5.0 2.5 eeafc1v6 r8( ) 200 2 000 12 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 eeafc1v120( ) 200 2 000 18 4 11 120 1.300 1 000 0.45 1. 55.02.5 eeufc1v1 80( ) 200 2 000 22 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1v2 20( ) 200 2 000 27 5 11 175 0.800 1 000 0.50 2. 05.02.5 eeufc1v2 70( ) 200 2 000 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 eeafc1v270( ) 200 2 000 33 5 11 175 0.080 1 000 0.50 2. 05.02.5 eeufc1v3 30( ) 200 2 000 39 5 15 235 0.500 1 000 0.50 2. 05.02.5 eeufc1v390( ) 200 2 000 47 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1v470( ) 200 2 000 56 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 eeufc1v5 60( ) 200 2 000 68 6.3 11.2 290 0.3 50 1000 0.50 2.5 5.0 2.5 eeufc1v 680( ) 200 2 000 82 6.3 15 400 0.2 50 1000 0.50 2.5 5.0 2.5 eeufc1v8 20( ) 200 2 000 100 8 11 .5 555 0.117 2000 0.60 3.5 5.0 eeufc1v1 01( ) 200 1 000 120 8 11 .5 555 0.117 2000 0.60 3.5 5.0 eeufc1v1 21( ) 200 1 000 150 8 11 .5 555 0.117 2000 0.60 3.5 5.0 eeufc1v151( ) 200 1 000 180 10 12.5 755 0.090 3000 0.60 5.0 5.0 eeufc1v1 81( ) 200 500 220 8 15 730 0.085 2000 0.60 3.5 5.0 eeufc1v221l( ) 200 1 000 10 12.5 75 5 0.090 3000 0.60 5.0 5.0 eeufc1v221( ) 200 500 270 10 16 1050 0.068 3000 0.60 5.0 5.0 eeufc1v2 71( ) 200 500 330 8 20 995 0.065 2000 0.60 3.5 5.0 eeufc1v331l( ) 200 1 000 10 16 1050 0.068 3 000 0.60 5.0 5.0 eeufc1v3 31( ) 200 500 390 10 20 1220 0.052 3000 0.60 5.0 5.0 eeufc1v391( ) 200 500 12.5 15 1205 0.065 5 000 0.60 5.0 5.0 eeufc1v391s( ) 200 500 470 10 20 12 20 0.052 3000 0.60 5.0 5.0 eeufc1v471( ) 200 500 560 10 25 1440 0.045 3000 0.60 5.0 5.0 eeufc1v5 61( ) 200 500 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc1v561s( ) 200 500 680 10 30 1815 0.035 3000 0.60 5.0 eeufc1v681l 100 12.5 20 16 55 0.038 5000 0.60 5.0 5.0 eeufc1v681( ) 200 500 16 15 1690 0.043 5 000 0.80 7.5 7.5 eeufc1v681s( ) 100 250 820 12.5 25 19 45 0.030 5000 0.60 5.0 5.0 eeufc1v821l( ) 200 500 18 15 2 000 0.038 5000 0.80 7.5 7.5 eeufc1v8 21( ) 100 250 1 000 12.5 25 19 45 0.030 5000 0.60 5.0 5.0 eeufc1v1 02( ) 200 500 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1v102s( ) 100 250 1200 12.5 30 23 10 0.025 5000 0.80 5.0 eeufc1v122l 100 16 20 2205 0.029 5000 0.80 7.5 7.5 eeufc1v1 22( ) 100 250 1500 12.5 35 25 10 0.022 5000 0.80 5.0 eeufc1v152l 100 16 25 2 555 0.022 5000 0.80 7.5 7.5 eeufc1v152( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 eeufc1v152s( ) 100 250 1800 12.5 40 26 55 0.018 5000 0.80 5.0 eeufc1v182l 100 16 25 2 555 0.022 5000 0.80 7.5 7.5 eeufc1v182( ) 100 250 18 20 2490 0.028 5000 0.80 7.5 7.5 eeufc1v182s( ) 100 250 2200 16 31.5 30 10 0.018 5000 0.80 7.5 eeufc1 v 222 100 18 25 2740 0.020 5000 0.80 7.5 7.5 eeufc1v 222s( ) 100 250 2700 16 35.5 31 50 0.016 5000 0.80 7.5 eeufc1v272l 100 18 31.5 36 35 0.016 5000 0.80 7.5 eeufc1v272 50 3300 18 35.5 3680 0.015 5000 0.80 7.5 eeufc1v332 50 3900 18 40 3735 0.014 5000 0.80 7.5 eeufc1v392 50 ?when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch b=5 mm, 7.5 mm, h=2.5 mm. ?please refer to the page of ?aping dimensions? endurance : 105 ? 4 to 6.3=1000 h, 8=2000 h, 10=3000 h, 12.5 to 18=5000 h 00 nov. 2012
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc C eee-70 C standard prod ucts w.v. cap. (20 %) case size speci? cation lead length part no. min. packaging q'ty dia. length ripple current (10 0 khz) (+105 c) imped- ance (10 0 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (f) (mm) (mm) (ma r.m.s.) ( ) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 50 1.0 5 11 20 2.400 1000 0.50 2.0 5.0 2.5 eeufc1h1r0( ) ??? 200 2000 2.2 5 11 45 1.800 1000 0.50 2.0 5.0 2.5 eeufc1h2r2( ) 200 2000 3.3 5 11 65 1.300 1000 0.50 2.0 5.0 2.5 eeufc1h3r3( ) 200 2000 4.7 5 11 95 1.300 1000 0.50 2.0 5.0 2.5 eeufc1h4r7( ) 200 2000 10 4 11 90 2.500 1000 0.45 1.5 5.0 2.5 eeufc1h100( ) 200 2000 5 11 125 1.300 1000 0.50 2.0 5.0 2.5 eeufc1h100l( ) 200 2000 12 5 11 135 1.300 1000 0.50 2.0 5.0 2.5 eeufc1h120( ) 200 2000 15 5 11 145 1.300 1000 0.50 2.0 5.0 2.5 eeufc1h150( ) 200 2000 18 5 11 155 1.300 1000 0.50 2.0 5.0 2.5 eeufc1h180( ) 200 2000 22 5 11 155 1.300 1000 0.50 2.0 5.0 2.5 eeufc1h220( ) 200 2000 27 5 15 215 0.900 1000 0.50 2.0 5.0 2.5 eeufc1h270( ) 200 2000 33 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 eeufc1h330( ) 200 2000 39 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 eeufc1h390( ) 200 2000 47 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5 eeufc1h470( ) 200 2000 56 6.3 15 360 0.400 1000 0.50 2.5 5.0 2.5 eeufc1h560( ) 200 2000 68 8 11.5 485 0.234 2000 0.60 3.5 5.0 eeufc1h680( ) 200 1000 82 8 11.5 485 0.234 2000 0.60 3.5 5.0 eeufc1h820( ) 200 1000 100 10 12.5 615 0.162 3000 0.60 5.0 5.0 eeufc1h101( ) 200 500 120 8 15 635 0.155 2000 0.60 3.5 5.0 eeufc1h121l( ) 200 1000 10 12.5 615 0.162 3000 0.60 5.0 5.0 eeufc1h121( ) 200 500 150 10 16 850 0.119 3000 0.60 5.0 5.0 eeufc1h151( ) 200 500 180 8 20 860 0.120 2000 0.60 3.5 5.0 eeufc1h181l( ) 200 1000 10 16 850 0.119 3000 0.60 5.0 5.0 eeufc1h181( ) 200 500 220 10 20 1030 0.090 3000 0.60 5.0 5.0 eeufc1h221( ) 200 500 12.5 15 1150 0.110 5000 0.60 5.0 5.0 eeufc1h221s( ) 200 500 270 10 25 1200 0.082 3000 0.60 5.0 5.0 eeufc1h271( ) 200 500 330 10 30 1610 0.060 3000 0.60 5.0 eeufc1h331l 100 12.5 20 1480 0.063 5000 0.60 5.0 5.0 eeufc1h331( ) 200 500 390 12.5 20 1480 0.063 5000 0.60 5.0 5.0 eeufc1h391( ) 200 500 16 15 1610 0.080 5000 0.80 7.5 7.5 eeufc1h391s( ) 100 250 470 10 30 1610 0.060 3000 0.60 5.0 eeufc1h471l 100 12.5 25 1832 0.050 5000 0.60 5.0 5.0 eeufc1h471( ) 200 500 560 12.5 25 1832 0.050 5000 0.60 5.0 5.0 eeufc1h561( ) 200 500 18 15 1900 0.068 5000 0.80 7.5 7.5 eeufc1h561s( ) 100 250 680 12.5 30 2215 0.040 5000 0.80 5.0 eeufc1h681l 100 16 20 1835 0.048 5000 0.80 7.5 7.5 eeufc1h681( ) 100 250 820 12.5 35 2285 0.034 5000 0.80 5.0 eeufc1h821l 100 18 20 2420 0.042 5000 0.80 7.5 7.5 eeufc1h821( ) 100 250 1000 12.5 40 2590 0.030 5000 0.80 5.0 eeufc1h102l 100 16 25 2235 0.034 5000 0.80 7.5 7.5 eeufc1h102( ) 100 250 1200 16 31.5 2700 0.028 5000 0.80 7.5 eeufc1h122 100 18 25 2610 0.029 5000 0.80 7.5 7.5 eeufc1h122s( ) 100 250 1500 16 35.5 2790 0.025 5000 0.80 7.5 eeufc1h152l 100 1800 16 40 2845 0.023 5000 0.80 7.5 eeufc1h182l 100 18 31.5 3000 0.025 5000 0.80 7.5 eeufc1h182 50 2200 18 35.5 3100 0.023 5000 0.80 7.5 eeufc1h222 50 when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch ? b=5 mm, 7.5 mm, h=2.5 mm. please refer to the page of taping dimensions. ??? please kindly accept last shipment : 31/mar/2015 endurance : 105 c 0 4 to 0 6.3=1000 h, 0 8=2000 h, 0 10=3000 h, 0 12.5 to 0 18=5000 h 01 oct. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc C eee-71 C standard prod ucts w.v. cap. (20 %) case size speci? cation lead length part no. min. packaging q'ty dia. length ripple current (10 0 khz) (+105 c) imped- ance (10 0 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (f) (mm) (mm) (ma r.m.s.) ( ) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 63 6.8 4 11 80 3.500 1000 0.45 1.5 5.0 2.5 eeufc1j6r8( ) 200 2000 12 5 11 145 2.000 1000 0.50 2.0 5.0 2.5 eeufc1j120( ) 200 2000 18 5 15 200 1.300 1000 0.50 2.0 5.0 2.5 eeufc1j180( ) 200 2000 22 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5 eeufc1j220( ) 200 2000 33 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5 eeufc1j330( ) 200 2000 39 6.3 15 330 0.700 1000 0.50 2.5 5.0 2.5 eeufc1j390( ) 200 2000 47 8 11.5 405 0.342 2000 0.60 3.5 5.0 eeufc1j470( ) 200 1000 56 8 11.5 405 0.342 2000 0.60 3.5 5.0 eeufc1j560( ) 200 1000 68 8 11.5 405 0.342 2000 0.60 3.5 5.0 eeufc1j680( ) 200 1000 82 10 12.5 535 0.256 3000 0.60 5.0 5.0 eeufc1j820( ) 200 500 100 8 15 535 0.230 2000 0.60 3.5 5.0 eeufc1j101l( ) 200 1000 10 12.5 535 0.256 3000 0.60 5.0 5.0 eeufc1j101( ) 200 500 120 10 16 600 0.194 3000 0.60 5.0 5.0 eeufc1j121( ) 200 500 150 8 20 690 0.178 2000 0.60 3.5 5.0 eeufc1j151( ) 200 1000 180 10 20 885 0.147 3000 0.60 5.0 5.0 eeufc1j181( ) 200 500 12.5 15 1020 0.150 5000 0.60 5.0 5.0 eeufc1j181s( ) 200 500 220 10 20 885 0.147 3000 0.60 5.0 5.0 eeufc1j221x( ) 200 500 10 25 1050 0.130 3000 0.60 5.0 5.0 eeufc1j221( ) 200 500 12.5 20 1285 0.085 5000 0.60 5.0 5.0 eeufc1j221s( ) 200 500 270 16 15 1410 0.090 5000 0.80 7.5 7.5 eeufc1j271( ) 100 250 330 10 30 1300 0.090 3000 0.60 5.0 eeufc1j331l 100 12.5 20 1285 0.085 5000 0.60 5.0 5.0 eeufc1j331( ) 200 500 390 12.5 25 1720 0.070 5000 0.60 5.0 5.0 eeufc1j391( ) 200 500 18 15 1690 0.086 5000 0.80 7.5 7.5 eeufc1j391s( ) 100 250 470 12.5 30 2090 0.055 5000 0.80 5.0 eeufc1j471l 100 16 20 1765 0.059 5000 0.80 7.5 7.5 eeufc1j471( ) 100 250 560 16 25 2160 0.050 5000 0.80 7.5 7.5 eeufc1j561( ) 100 250 680 12.5 35 2265 0.047 5000 0.80 5.0 eeufc1j681l 100 16 25 2160 0.050 5000 0.80 7.5 7.5 eeufc1j681( ) 100 250 18 20 2290 0.055 5000 0.80 7.5 7.5 eeufc1j681s( ) 100 250 820 12.5 40 2560 0.042 5000 0.80 5.0 eeufc1j821l 100 16 31.5 2670 0.043 5000 0.80 7.5 eeufc1j821 100 18 25 2585 0.043 5000 0.80 7.5 7.5 eeufc1j821s( ) 100 250 1000 16 31.5 2670 0.043 5000 0.80 7.5 eeufc1j102u 100 16 35.5 2770 0.036 5000 0.80 7.5 eeufc1j102 100 1200 16 40 2825 0.030 5000 0.80 7.5 eeufc1j122l 100 18 31.5 2950 0.032 5000 0.80 7.5 eeufc1j122 50 1500 18 35.5 3095 0.030 5000 0.80 7.5 eeufc1j152 50 1800 18 40 3205 0.025 5000 0.80 7.5 eeufc1j182 50 when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch ? b=5 mm, 7.5 mm, h=2.5 mm. please refer to the page of taping dimensions. endurance : 105 c 0 4 to 0 6.3=1000 h, 0 8=2000 h, 0 10=3000 h, 0 12.5 to 0 18=5000 h 01 oct. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ fc C eee-72 C standard prod ucts w.v. cap. (20 %) case size speci? cation lead length part no. min. packaging q'ty dia. length ripple current (10 0 khz) (+105 c) imped- ance (10 0 khz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? h (v) (f) (mm) (mm) (ma r.m.s.) ( ) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 100 5.6 5 11 80 4.10 1000 0.5 2.0 5.0 2.5 eeufc2a5r6( ) 200 2000 8.2 5 15 90 2.80 1000 0.5 2.0 5.0 2.5 eeufc2a8r2( ) 200 2000 12 6.3 11. 2 114 1.8 0 10 0 0 0.5 2.5 5.0 2.5 eeufc2a120( ) 200 2000 18 6.3 15 155 1.10 1000 0.5 2.5 5.0 2.5 eeufc2a180( ) 200 2000 22 8 11.5 260 0.680 2000 0.6 3.5 5.0 eeufc2a220( ) 200 1000 33 8 15 340 0.450 2000 0.6 3.5 5.0 eeufc2a330l( ) 200 1000 10 12.5 306 0.530 3000 0.6 5.0 5.0 eeufc2a330( ) 200 500 39 8 20 455 0.330 2000 0.6 5.0 5.0 eeufc2a390l( ) 200 1000 10 16 400 0.360 3000 0.6 5.0 5.0 eeufc2a390( ) 200 500 56 10 20 463 0.240 3000 0.6 5.0 5.0 eeufc2a560( ) 200 500 68 10 25 599 0.210 3000 0.6 5.0 5.0 eeufc2a680l( ) 200 500 12.5 15 511 0.230 5000 0.6 5.0 5.0 eeufc2a680( ) 200 500 100 10 30 698 0.150 3000 0.6 5.0 eeufc2a101l 100 12.5 20 671 0.180 5000 0.6 5.0 5.0 eeufc2a101( ) 200 500 120 16 15 793 0.140 5000 0.8 7.5 7.5 eeufc2a121s( ) 100 250 150 12.5 25 807 0.110 5000 0.6 5.0 5.0 eeufc2a151( ) 200 500 18 15 917 0.120 5000 0.8 7.5 7.5 eeufc2a151s( ) 100 250 180 12.5 30 937 0.098 5000 0.8 5.0 eeufc2a181l 100 16 20 995 0.110 5000 0.8 7.5 7.5 eeufc2a181( ) 100 250 220 12.5 35 1040 0.087 5000 0.8 5.0 eeufc2a221l 100 16 25 1170 0.089 5000 0.8 7.5 7.5 eeufc2a221( ) 100 250 270 12.5 40 1130 0.072 5000 0.8 5.0 eeufc2a271l 100 18 20 1230 0.080 5000 0.8 7.5 7.5 eeufc2a271s( ) 100 250 330 16 31.5 1520 0.062 5000 0.8 7.5 eeufc2a331 100 18 25 1420 0.070 5000 0.8 7.5 7.5 eeufc2a331s( ) 100 250 390 16 35.5 1730 0.053 5000 0.8 7.5 eeufc2a391l 100 18 31.5 1600 0.062 5000 0.8 7.5 eeufc2a391 50 470 16 40 1920 0.047 5000 0.8 7.5 eeufc2a471 100 560 18 35.5 1770 0.041 5000 0.8 7.5 eeufc2a561 50 680 18 40 2300 0.036 5000 0.8 7.5 eeufc2a681 50 when requesting taped product, please put the letter "b" or "h" be tween the "( )". lead wire pitch ? b=5 mm, 7.5 mm, h=2.5 mm. please refer to the page of taping dimensions. endurance : 105 c 0 4 to 0 6.3=1000 h, 0 8=2000 h, 0 10=3000 h, 0 12.5 to 0 18=5000 h 01 oct. 2013
|
